Skip to content
Polytrade
  • Home
  • Products
  • About
  • Blog
  • Contact
Polytrade

The importance of cement test for the process of road surface

Petroleum asphalt cement (PAC) is a very viscous material, semi-solid or solid at room temperature, presents thermoplastic behavior and is […]

How the bond coat makes for long-lasting roads

Experts agree: For long-lived asphalt pavements and overlays, bond them with a well-placed bond or “tack” coat.

Image is a photo of concrete stairs taken from below. The angle leads the eye to to the top of the stairs. The concrete stairs are light gray and contrast with the clear blue sky on the horizon. The stairs do not look new, but in excelent shape. Most likely air entrained concrete was used to make them last the outdoor conditions.

Common Questions about Air Entrained Concrete

Let us go back to basics! This article tackles the most commonly asked questions about air-entrained concrete.

The image shows 2 modern concrete buildings at an angle from the ground up. They are adorned with innumerous plants and greenery. The blue sky is visible between them. On Earth Day, this image represents the progress done so far towards a greener and more sustainable future in the concrete industry. But the challenges continue. There is much to be done to decarbonize the concrete industry as a whole.

Sustainability and Decarbonization

Thankfully, the emphasis is now on clean energy, decarbonization and practicing methods that have a positive impact.

This is the feature image of the blog post Top 3 Reasons to use Air-Entraining Agents in Concrete. The image is a picture of the side of a building, showing its intended architectural feature of exposed concrete. The center of the image shows concrete stairs giving ample acess to the several floors of the building.

Top 3 Reasons to use Air-Entraining Agents in Concrete

Air entraining agents are used by themselves or teamed-up with other concrete additives to enhance concrete properties. Far from being […]

This is the feature image of the blog post 5 Reasons to Use Anionic Bitumen Emulsions Over Cationic Emulsions. The picture shows an aeral shot of a curvy asphalt road. This highway is opening way within a thick green forest. Anonic emulsions are recomended for use in remote places like this to maintain the road surface area.

5 Reasons to Use Anionic Bitumen Emulsions Over Cationic Emulsions

Cationic emulsions are widely adopted and used around the world in road surface binder technologies and asphalt products. But that […]

Posts pagination

Previous 1 2 3 Next

Learn more

  • Home
  • Products
  • About
  • Blog
  • Contact

Solutions

  • Concrete
  • Mortars
  • Road Surface

Products

  • Carbofen Admix
  • Carbofen Admix RVT
  • Carbofen NCX for Concrete
  • Carbofen NCX for Mortar
  • Carbofen-X for Mortar
  • Carbofen Air+
  • AIR Mortar+
  • CarboAsphalt
  • Carbocrete
  • Emulsifen G5000
  • Emulsifen G10000
  • Emulsifen RVT
  • Emulsifen GPRO

Last news

  • Strength and Efficiency: How Carbofen NCX Improves Concrete Mix Stability
  • Sustainability in Construction: How Carbofen NCX Reduces Environmental Impact
  • How Carbofen NCX Enhances Freeze-Thaw Resistance in Concrete

Copyright © Polytrade. Developed and optimized by Start Co.

  • Contact us

  • LinkedIn